Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-19
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Introduced Cisco MDS SAN-OS Release 1.3(4a).
BOOTVAR-6
Error Message BOOTVAR-6-ALREADY_IN_SYNC: Image already in sync.
Explanation No need to update the image on the standby supervisor.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message BOOTVAR-6-CONFIG_UPDATED: Boot configuration updated.
Explanation
The boot-loader configuration files have been successfully updated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message BOOTVAR-6-STARTING: Boot configuration initialized.
Explanation The service has successfully started.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4a).
CALLHOME Messages
This section contains the Call Home (CALLHOME) messages.
CALLHOME-2
Error Message CALLHOME-2-EVENT: [chars].
Explanation
A Call Home event occurred.
Recommended Action If you have configured your e-mail address to receive Call Home notifications,
check your e-mail for more details about this Call Home event. If Call Home was not enabled, use
either CLI commands or Cisco Fabric Manager procedures to get more information about the error.
Introduced Cisco MDS SAN-OS Release 1.2(2a).