Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-21
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message CALLHOME-3-MESSAGE_SIZE_EXCEED: message size for callhome
alert:[chars] exceeds maximum limit for destination profile:[chars].
Explanation The message size for the Call Home alert exceeds the maximum limit for the destination
profile shown in the error message.
Recommended Action Verify the maximum message size for the destination profile under question.
Increase it, if possible, to match the maximum limit allowed by your e-mail destinations.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
CALLHOME-6
Error Message CALLHOME-6-NONCRIT_EVENT: [chars].
Explanation A noncritical Call Home event occurred.
Recommended Action If you have configured your e-mail address to receive Call Home notifications,
check your e-mail for more details about this Call Home event. If Call Home was not enabled, use
either CLI commands or Fabric Manager procedures to get more information about the error.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
CDP Messages
This section contains the Cisco Discovery Protocol (CDP) messages.
CDP-2
Error Message CDP-2-INITFAIL: CDP Daemon Initialization failed: [chars].
Explanation
The Cisco Discovery Protocol daemon initialization failed because of the reason shown
in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
CDP-3
Error Message CDP-3-ALLOCFAIL: Heap Memory allocation failed: [chars].
Explanation The Cisco Discovery Protocol daemon is out of dynamic memory. The error message
shows the context where the failure occurred.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).