Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-23
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message CDP-3-SOCKBINDFAIL: Failed to bind to raw socket, interface [hex] -
[chars].
Explanation The Cisco Discovery Protocol failed to bind to a raw socket. The error message
identifies the interface and the reason for this failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message CDP-3-SOCKOPENFAIL: Failed to open socket for receiving raw 802_2
packets - [chars].
Explanation An attempt to open a socket for receiving raw 802.2 packets failed due to the reason
shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
CDP-6
Error Message CDP-6-CDPDUP: CDP Daemon Up.
Explanation The Cisco Discovery Protocol daemon was created successfully and is up and running.
Recommended Action This is an informational message.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message CDP-6-CDPEXIT: CDP daemon shutting down gracefully.
Explanation
The Cisco Discovery Protocol daemon is shutting down gracefully.
Recommended Action This is an informational message.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message CDP-6-PORTDISABLE: CDP disabled on port [chars].
Explanation
The Cisco Discovery Protocol was disabled on a port. The error message shows the
Interface-ID string that identifies the port.
Recommended Action This is an informational message.
Introduced Cisco MDS SAN-OS Release 1.2(2a).