Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-29
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Introduced Cisco MDS SAN-OS Release 2.0(1b).
CFS-4
Error Message CFS-4-LICEXP: [chars].
Explanation The Cisco Fabric Services license is going to expire. The error message shows the
expiration time.
Recommended Action Install a license.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message CFS-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec].
Explanation
There was a version mismatch between the Cisco Fabric Services and one of its
persistent storage databases. The persistent information has been translated to the new format.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
CFS-6
Error Message CFS-6-BECAME_ACTIVE: Became ACTIVE from standby mode.
Explanation The Cisco Fabric Services on the standby supervisor became active and it is ready to
serve client requests.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message CFS-6-BECAME_STDBY: Became STANDBY from active mode.
Explanation
The Cisco Fabric Services changed to standby mode from active mode.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message CFS-6-EXCESSIVE_DELAY: [chars].
Explanation A processing event took an excessive amount of time. The description of the event is
shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).