Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
Contents
viii
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Understanding Access VLANs 12-3
Understanding the Native VLAN ID for Trunk Ports 12-3
Understanding Allowed VLANs 12-4
Configuring Access and Trunk Interfaces 12-4
Configuring a LAN Interface as an Ethernet Access Port 12-4
Configuring Access Host Ports 12-5
Configuring Trunk Ports 12-6
Configuring the Native VLAN for 802.1Q Trunking Ports 12-6
Configuring the Allowed VLANs for Trunking Ports 12-7
Verifying Interface Configuration 12-8
CHAPTER 13 Configuring the MAC Address Table 13-1
Information About MAC Addresses 13-1
Configuring MAC Addresses 13-1
Configuring a Static MAC Address 13-2
Configuring the Aging Time for the MAC Table 13-2
Clearing Dynamic Addresses from the MAC Table 13-3
Verifying the MAC Address Configuration 13-3
CHAPTER 14 Configuring IGMP Snooping 14-1
Information About IGMP Snooping 14-1
IGMPv1 and IGMPv2 14-2
IGMPv3 14-3
IGMP Snooping Querier 14-3
IGMP Forwarding 14-3
Configuring IGMP Snooping Parameters 14-4
Verifying IGMP Snooping Configuration 14-6
CHAPTER 15 Configuring Traffic Storm Control 15-1
Information About Traffic Storm Control 15-1
Guidelines and Limitations 15-2
Configuring Traffic Storm Control 15-3
Verifying Traffic Storm Control Configuration 15-3
Displaying Traffic Storm Control Counters 15-3
Traffic Storm Control Example Configuration 15-4
Default Settings 15-4