Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
Contents
xx
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
NPV Mode 34-2
Server Interfaces 34-2
NP Uplinks (External Interfaces) 34-3
FLOGI Operation 34-3
NPV Traffic Management 34-4
NPV Traffic Management Guidelines 34-5
Guidelines and Limitations 34-5
Configuring NPV 34-6
Enabling NPV 34-6
Configuring NPV Interfaces 34-7
Configuring NPV Traffic Management 34-7
Verifying NPV 34-8
Verifying NPV Traffic Management 34-9
CHAPTER 35 Configuring VSAN Trunking 35-1
Information About VSAN Trunking 35-1
VSAN Trunking Mismatches 35-2
VSAN Trunking Protocol 35-2
Configuring VSAN Trunking 35-3
Guidelines and Restrictions 35-3
Enabling or Disabling the VSAN Trunking Protocol 35-3
About Trunk Mode 35-3
Configuring Trunk Mode 35-4
About Trunk-Allowed VSAN Lists 35-4
Configuring an Allowed-Active List of VSANs 35-6
Displaying VSAN Trunking Information 35-6
Default Settings 35-7
CHAPTER 36 Configuring SAN Port Channels 36-1
Information About SAN Port Channels 36-1
Understanding Port Channels and VSAN Trunking 36-2
Understanding Load Balancing 36-2
Configuring SAN Port Channels 36-4
SAN Port Channel Configuration Guidelines 36-5
Creating a SAN Port Channel 36-6
About SAN Port Channel Modes 36-6
About SAN Port Channel Deletion 36-7
Deleting SAN Port Channels 36-8