Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
Contents
xxi
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Interfaces in a SAN Port Channel 36-8
About Interface Addition to a SAN Port Channel 36-9
Adding an Interface to a SAN Port Channel 36-9
Forcing an Interface Addition 36-10
About Interface Deletion from a SAN Port Channel 36-10
Deleting an Interface from a SAN Port Channel 36-11
Port Channel Protocol 36-11
About Channel Group Creation 36-12
Autocreation Guidelines 36-13
Enabling and Configuring Autocreation 36-14
About Manually Configured Channel Groups 36-14
Converting to Manually Configured Channel Groups 36-14
Verifying SAN Port Channel Configuration 36-15
Default Settings 36-16
CHAPTER 37 Configuring and Managing VSANs 37-1
Information About VSANs 37-1
VSAN Topologies 37-1
VSAN Advantages 37-3
VSANs Versus Zones 37-4
Configuring VSANs 37-5
About VSAN Creation 37-6
Creating VSANs Statically 37-6
About Port VSAN Membership 37-7
Assigning Static Port VSAN Membership 37-7
Displaying VSAN Static Membership 37-7
About the Default VSAN 37-8
About the Isolated VSAN 37-8
Displaying Isolated VSAN Membership 37-8
Operational State of a VSAN 37-9
About Static VSAN Deletion 37-9
Deleting Static VSANs 37-10
About Load Balancing 37-10
Configuring Load Balancing 37-10
About Interop Mode 37-11
Displaying Static VSAN Configuration 37-11
Default Settings 37-11