Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
26-12
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 26 Configuring Smart Call Home
Configuring Call Home
Disabling Duplicate Message Throttle
You can limit the number of duplicate messages received for the same event. By default, the switch limits
the number of duplicate messages received for the same event. If the number of duplicate messages sent
exceeds 30 messages within a 2-hour time frame, then the switch discards further messages for that alert
type.
To disable duplicate message throttling in callhome configuration mode, perform this task:
Enabling or Disabling Call Home
Once you have configured the contact information, you can enable the Call Home function.
To enable Call Home in callhome configuration mode, perform this task:
To disable Call Home in the callhome configuration mode, perform this task:
To enable Call Home distribution using CFS in the callhome configuration mode, perform this task:
To commit Call Home configuration changes and distribute using CFS in the callhome configuration
mode, perform this task:
Command Purpose
switch(config-callhome)# no
duplicate-message throttle
Disables duplicate message throttling for Call
Home. Enabled by default.
Command Purpose
switch(config-callhome)# enable
Enables Call Home. Disabled by default.
Command Purpose
switch(config-callhome)# no enable
Disables Call Home. Disabled by default
Command Purpose
switch(config-callhome)# distribute
Enables Call Home distribution using CFS.
Disabled by default.
Command Purpose
switch(config-callhome)# commit
Commits Call Home configuration changes and
distributes the changes to call CFS-enabled
devices.