Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
26-13
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 26 Configuring Smart Call Home
Verifying Call Home Configuration
To discard Call Home configuration changes and release the CFS lock in callhome configuration mode,
perform this task:
Testing Call Home Communications
You can generate a test message to test your Call Home communications.
To generate a test Call Home message, perform this task:
Verifying Call Home Configuration
To display Call Home configuration information, perform one of the following tasks:
Command Purpose
switch(config-callhome)# abort
Discards Call Home configuration changes and
releases the CFS lock. Use this command if you
are the CFS lock owner or if you are logged into
the device that holds the CFS lock
Command Purpose
switch(config-callhome)# callhome send
diagnostic
Sends the specified Call Home test message to all
configured destinations.
switch(config-callhome)# callhome test
Sends a test message to all configured
destinations.
callhome test and callhome test inventory
commands are supported.
Command Purpose
show callhome
Displays the status for Call Home.
show callhome destination-profile name
Displays one or more Call Home destination
profiles.
show callhome merge
Displays the status of the last CFS merge for Call
Home.
show callhome pending
Displays the Call Home configuration changes in
the pending CFS database.
show callhome pending-diff
Displays the differences between the pending and
running Call Home configuration.
show callhome session
Displays the status of the last Call Home CFS
command.
show callhome status
Displays the Call Home status.
show callhome transport-email
Displays the e-mail configuration for Call Home.
show callhome user-def-cmds
Displays CLI commands added to any alert
groups.