Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
26-14
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 26 Configuring Smart Call Home
Call Home Example Configuration
Call Home Example Configuration
The following example uses CFS to create a destination profile called Noc101, associate the Cisco-TAC
alert group to that profile, configure contact and e-mail information, and distribute those changes to all
CFS-enabled devices:
configure terminal
snmp-server contact [e-mail]
callhome
distribute
email-contact [e-mail]
phone-contact [phone]
street-address 123 Anystreet st. Anytown,AnyWhere
destination-profile Noc101 full-text
destination-profile full-text-destination email-addr [e-mail]
destination-profile full-text-destination message-level 5
destination-profile Noc101 alert-group Configuration
alert-group Configuration user-def-cmd “show ip routing”
transport email smtp-server 192.0.2.10 use-vrf Red
enable
commit
Default Settings
Table 26-3 lists the default settings for Call Home parameters.
show running-config [callhome |
callhome-all]
show startup-config callhome
Displays the running configuration for Call
Home.
show startup-config callhome
Displays the startup configuration for Call Home.
show tech-support callhome
Displays the technical support output for Call
Home.
Command Purpose
Table 26-3 Default Call Home Parameters
Parameters Default
Destination message size for a message sent in full
text format.
4000000
Destination message size for a message sent in
XML format.
4000000
Destination message size for a message sent in
short text format.
4000
SMTP server port number if no port is specified. 25
Alert group association with profile. All for full-text-destination and
short-text-destination profiles. The cisco-tac alert
group for the CiscoTAC-1 destination profile.
Format type. XML
Call Home message level. 0 (zero)