Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
27-6
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 27 Configuring SNMP
Configuring SNMP
To enforce SNMP message encryption for a user in the global configuration mode, perform this task:
To enforce SNMP message encryption for all users in the global configuration mode, perform this task:
Assigning SNMPv3 Users to Multiple Roles
After you configure an SNMP user, you can assign multiple roles for the user.
Note Only users belonging to a network-admin role can assign roles to other users.
To assign a role to an SNMP user in a global configuration mode, perform this task:
Creating SNMP Communities
You can create SNMP communities for SNMPv1 or SNMPv2c.
To create an SNMP community string in a global configuration mode, perform this task:
Configuring SNMP Notification Receivers
You can configure Cisco NX-OS to generate SNMP notifications to multiple host receivers.
Command Purpose
switch(config)# snmp-server user name
enforcePriv
Enforces SNMP message encryption for this user.
Command Purpose
switch(config)# snmp-server
globalEnforcePriv
Enforces SNMP message encryption for all users.
Command Purpose
switch(config)# snmp-server user name group
Associates this SNMP user with the configured
user role.
Command Purpose
switch(config)# snmp-server community name
group {ro | rw}
Creates an SNMP community string.