Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
33-2
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 33 Configuring Domain Parameters
Information About Fibre Channel Domains
Figure 33-1 Sample fcdomain Configuration
Note Domain IDs and VSAN values used in all procedures are only provided as examples. Be sure to use IDs
and values that apply to your configuration.
This section describes the fcdomain feature and includes the following topics:
• About Domain Restart, page 33-3
• Restarting a Domain, page 33-3
• About Domain Manager Fast Restart, page 33-3
• Enabling Domain Manager Fast Restart, page 33-4
• About Switch Priority, page 33-4
• Configuring Switch Priority, page 33-4
• About fcdomain Initiation, page 33-5
• Disabling or Reenabling fcdomains, page 33-5
• Configuring Fabric Names, page 33-5
• About Incoming RCFs, page 33-5
• Rejecting Incoming RCFs, page 33-6
• About Autoreconfiguring Merged Fabrics, page 33-6
Local WWN
20:02:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 7
Configured priority = 128
Runtime priority = 128
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
Local WWN
20:01:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 2
Configured priority = 128
Runtime priority = 2
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
Local WWN
20:03:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 102
Configured priority = 128
Runtime priority = 128
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
7.0.1
7.0.2
7.0.0
99.0.1
99.0.2
99.0.3
99.1.2
99.1.1
79953
Switch 7 (subordinate)
Switch 99 (subordinate)
Switch 2 (principal)