Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
44-11
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 44 Configuring FC-SP and DHCHAP
Default Settings
Other Devices' Passwords:
Password for device with WWN:20:00:00:05:30:00:54:de is *******
MDS-9509# show fcsp interface fc2/4
Fc2/4
fcsp authentication mode:SEC_MODE_ON
Status:Successfully authenticated
You have now enabled and configured DHCHAP authentication for the sample setup in Figure 44-2.
Default Settings
Table 44-2 lists the default settings for all fabric security features in any switch.
Table 44-2 Default Fabric Security Settings
Parameters Default
DHCHAP feature Disabled
DHCHAP hash algorithm A priority list of MD5 followed by SHA-1 for DHCHAP
authentication
DHCHAP authentication mode Auto-passive
DHCHAP group default priority
exchange order
0, 4, 1, 2, and 3, respectively
DHCHAP timeout value 30 seconds