Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
48-7
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 48 Configuring Port Tracking
Default Port Tracking Settings
Linked to 1 port(s)
Port linked to interface fc2/1
...
The following example shows how to display the port track mode:
switch# show interface fc 2/4
fc2/4 is up
Hardware is Fibre Channel, FCOT is short wave laser
...
Transmit B2B Credit is 64
Receive B2B Credit is 16
Receive data field Size is 2112
Beacon is turned off
Port track mode is force_shut
<--this port remains shut even if the tracked port is back up
Default Port Tracking Settings
Table 48-1 lists the default settings for port tracking parameters.
Table 48-1 Default Port Tracking Parameters
Parameters Default
Port tracking Disabled
Operational binding Enabled along with port tracking