Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
50-6
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 50 Troubleshooting
Troubleshooting Fibre Channel
To perform the fctrace operation, perform one of these tasks:
Command Purpose
switch# fctrace fcid 0xd70000 vsan 1
Route present for : 0xd70000
20:00:00:0b:46:00:02:82(0xfffcd5)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
Invokes fctrace for the specified FC ID of
the destination N port.
switch# fctrace pwwn 21:00:00:e0:8b:06:d9:1d vsan 1
timeout 5
Route present for : 21:00:00:e0:8b:06:d9:1d
20:00:00:0b:46:00:02:82(0xfffcd5)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
Invokes fctrace using the pWWN of the
destination N port.
By default the period to wait before
timing out is 5 seconds, The range is from
one through 10 seconds.
switch# fctrace device-alias disk1 v 1
Route present for : 22:00:00:0c:50:02:ce:f8
20:00:00:05:30:00:31:1e(0xfffca9)
Invokes fctrace using the device alias of
the destination N port.