Cisco Nexus 5000 Series Switch CLI Software Configuration Guide, NX-OS 4.0(1a)N1 (OL-16597-01, January 2009)

Send feedback to [e-mail]
4-3
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 4 Managing Licenses
License Installation
License Installation
You can either obtain a factory-installed license (only applies to new switch orders) or perform a manual
license installation of the license (applies to existing switches in your network).
This section includes the following topics:
• Obtaining a Factory-Installed License, page 4-3
• Performing a Manual Installation, page 4-4
Obtaining a Factory-Installed License
You can obtain factory-installed licenses for a new Cisco Nexus 5000 Series switch.
To obtain a factory-installed license, perform this task:
Step 1 Contact your reseller or Cisco representative and request this service.
Note If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco Systems, contact Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Your switch is shipped with the required licenses installed in the system. The proof of purchase
document is sent along with the switch.
Step 2 Obtain the host ID from the proof of purchase document for future use.
You can now start to use the switch and the licensed features.
Storage Services Package
N5020-SS
• N5020-SS includes the following services for one
NX5020 system:
• Native Fibre Channel
• FCoE
• NPV
• FC Port Security
• Fabric Binding
Advanced Services Package
N5000-AS
• This package will be available in a future release.
Table 4-1 Feature-Based Licenses (continued)
Feature License Features