Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
1-86
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show install all
show install all
To display information related to the operation of the install all command, use the show install all
command.
show install all {failure-reason | impact [kickstart | system] | status}
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the installation failure reason:
switch# show install all failure-reason
This example shows how to display the impact of installing new images:
switch# show install all impact
This example shows how to display the status of the software installation process:
switch# show install all status
Related Commands
failure-reason Displays the software installation failure reason.
impact Displays the impact of installing the images referred to in the boot variables.
kickstart (Optional) Displays the impact of installing the kickstart image referred to
in the kickstart boot variable.
system (Optional) Displays the impact of installing the system image referred to in
the kickstart boot variable.
status Displays the status of the software installation process.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
install all Installs the software on the physical device.
show boot Displays the boot variable configuration.