Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
1-119
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
terminal session-timeout
terminal session-timeout
To set the terminal inactivity timeout for the current session, use the terminal session-timeout
command. To revert to the default, use the no form of this command.
terminal session-timeout minutes
terminal no session-timeout
Syntax Description
Command Default Terminal session timeout is disabled (0 minutes).
Command Modes EXEC mode
Command History
Usage Guidelines The terminal session inactivity timeout setting applies only to the current session.
Examples This example shows how to set the terminal inactivity timeout for the session to 10 minutes:
switch# terminal session-timeout 10
This example shows how to revert to the default terminal inactivity timeout for the session:
switch# terminal no session-timeout
Related Commands
minutes Number of minutes. The range is from 0 to 525600 minutes (8760 hours).
Use 0 to disable the terminal inactivity timeout.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show terminal Displays the terminal session configuration.