Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
2-61
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
spanning-tree mst forward-time
spanning-tree mst forward-time
To set the forward-delay timer for all the instances on the switch, use the spanning-tree mst forward-time
command. To return to the default settings, use the no form of this command.
spanning-tree mst forward-time seconds
no spanning-tree mst forward-time
Syntax Description
Command Default 15 seconds.
Command Modes Configuration mode
Command History
Examples This example shows how to set the forward-delay timer:
switch(config)# spanning-tree mst forward-time 20
Related Commands
seconds Number of seconds to set the forward-delay timer for all the instances on the
switch; the range of valid values is from 4 to 30 seconds.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show spanning-tree
mst
Displays the information about the MST protocol.