Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
2-91
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
svi enable
svi enable
To enable the creation of VLAN interfaces, use the svi enable command. To disable the VLAN interface
feature, use the no form of this command.
svi enable
no svi enable
Syntax Description This command has no arguments or keywords.
Command Default VLAN interfaces are disabled.
Command Modes Configuration mode
Command History
Usage Guidelines You must use the feature interface-vlan or the svi enable command before you can create VLAN
interfaces.
Examples This example shows how to enable the interface VLAN feature on the switch:
switch(config)# svi enable
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
4.0(1a)N1(1) This command was deprecated and replaced with the feature interface-vlan
command. For backwards compatibility, it will be maintained for a number
of releases.
Command Description
interface vlan Creates a VLAN interface.