Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
3-24
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 3 Ethernet Show Commands
show spanning-tree brief
show spanning-tree brief
To display a brief summary of the STP status and configuration on the switch, use the show
spanning-tree brief command.
show spanning-tree brief [active]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display a brief summary of STP information:
switch(config)# show spanning-tree brief
Related Commands
active (Optional) Displays information about STP active interfaces only.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show spanning-tree Displays information STP.
show spanning-tree
active
Displays information about STP active interfaces only.
show spanning-tree
bridge
Displays bridge ID, timers, and protocol for the local bridge on the switch.
show spanning-tree
detail
Displays detailed information about STP.
show spanning-tree
interface
Displays STP interface status and configuration of specified interfaces.
show spanning-tree
mst
Displays information about MST STP.
show spanning-tree
root
Displays status and configuration of the root bridge for the STP instance to
which this switch belongs.
show spanning-tree
summary
Displays summary information about STP.
show spanning-tree
vlan
Displays STP information for specified VLANs.