Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
4-2
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 4 Fabric Extender Commands
attach fex
attach fex
To access the CLI of a connected Fabric Extender to run diagnostic commands, use the attach fex
command.
attach fex chassis_ID
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Use the attach fex command to access the CLI on a connected Fabric Extender and performing
diagnostic commands. We recommend that you use this command only following direction from Cisco
technical support personnel.
Examples This example shows how to access the CLI of a connected Fabric Extender to run diagnostic commands:
switch# attach fex 101
Related Commands
chassis_ID Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
Release Modification
4.0(1a)N2(1) This command was introduced.
Command Description
show fex Displays all configured Fabric Extender chassis connected to the switch.