Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
4-16
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 4 Fabric Extender Commands
show fex transceiver
show fex transceiver
To display information about the transceiver connecting a Fabric Extender to the Cisco Nexus 5000
Series switch, use the show fex transceiver command.
show fex chassis_ID transceiver [calibration | detail]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information about the transceiver connecting a Fabric Extender to
the Cisco Nexus 5000 Series switch:
switch# show fex transceiver
Related Commands
chassis_ID Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
calibration (Optional) Displays detailed calibration information about the transceiver.
detail (Optional) Displays detailed diagnostic information about the transceiver.
Release Modification
4.0(1a)N2(1) This command was introduced.
Command Description
fex Creates a Fabric Extender and enters Fabric Extender configuration mode.