Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
5-14
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 5 Quality of Service Commands
show interface priority-flow-control
show interface priority-flow-control
To display the priority flow control details for a specified interface, use the show interface
priority-flow-control command.
show interface [name] priority-flow-control
Syntax Description
Command Default None
Command Modes Global configuration.
Command History
Examples This example shows how to display the priority flow control details for a specified interface:
switch(config)# show interface ethernet 1/1 priority-flow-control
---------------------------------------
Port Mode Oper RxPPP TxPPP
---------------------------------------
Eth1/1 auto off 0 0
The interface specified is Ethernet 1/1, the PFC mode is set to negotiate PFC capability, the operation is
off and packets transmitted is zero.
Related Commands
name (Optional) Name of the interface.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
priority-flow-control Sets the PFC mode for the selected interface.