Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
6-39
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
interface policy deny
interface policy deny
To enter interface policy configuration mode for a user role, use the interface policy deny command.
To revert to the default interface policy for a user role, use the no form of this command.
interface policy deny
no interface policy deny
Syntax Description This command has no arguments or keywords.
Command Default All interfaces
Command Modes User role configuration
Command History
Examples This example shows how to enter interface policy configuration mode for a user role:
switch(config)# role name MyRole
switch(config-role)# interface policy deny
switch(config-role-interface)#
This example shows how to revert to the default interface policy for a user role:
switch(config)# role name MyRole
switch(config-role)# no interface policy deny
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
role name Creates or specifies a user role and enters user role configuration mode.
show role Displays user role information.