Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
6-126
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show vlan filter
show vlan filter
To display information about instances of the vlan filter command, including the VLAN access map and
the VLAN IDs affected by the command, use the show vlan filter command.
show vlan filter [access-map map-name | vlan vlan-id]
Syntax Description
Command Default All instances of VLAN access maps applied to a VLAN are displayed, unless you use the access-map
keyword and specify an access map or you use the vlan keyword and specify a VLAN ID.
Command Modes EXEC mode
Command History
Examples This example shows how to display all VLAN access map information on the switch:
switch# show vlan filter
Related Commands
access-map map-name (Optional) Limits the output to VLANs that the specified access map is
applied to.
vlan vlan-id (Optional) Limits the output to access maps that are applied to the specified
VLAN only.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
action Specifies an action for traffic filtering in a VLAN access map.
match Specifies an ACL for traffic filtering in a VLAN access map.
show vlan access-map Displays all VLAN access maps or a VLAN access map.
vlan access-map Configures a VLAN access map.
vlan filter Applies a VLAN access map to one or more VLANs.