Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
6-151
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
vrf policy deny
vrf policy deny
To enter virtual forwarding and routing instance (VRF) policy configuration mode for a user role, use
the vrf policy deny command. To revert to the default VRF policy for a user role, use the no form of this
command.
vrf policy deny
no vrf policy deny
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes User role configuration.
Command History
Examples This example shows how to enter VRF policy configuration mode for a user role:
switch(config)# role name MyRole
switch(config-role)# vrf policy deny
switch(config-role-vrf)#
This example shows how to revert to the default VRF policy for a user role:
switch(config)# role name MyRole
switch(config-role)# no vrf policy deny
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
role name Creates or specifies a user role and enters user role configuration mode.
show role Displays user role information.