Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-38
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fabric-binding activate
fabric-binding activate
To activate fabric binding in a VSAN, use the fabric-binding activate command. To disable this feature,
use the no form of the command.
fabric-binding activate vsan vsan-id [force]
no fabric-binding activate vsan vsan-id
Syntax Description
Command Default Disabled.
Command Modes Configuration mode
Command History
Examples The following example activates the fabric binding database for the specified VSAN:
switch(config)# fabric-binding activate vsan 1
The following example deactivates the fabric binding database for the specified VSAN:
switch(config)# no fabric-binding activate vsan 10
The following example forcefully activates the fabric binding database for the specified VSAN
switch(config)# fabric-binding activate vsan 3 force
The following example reverts to the previously configured state or to the factory default (if no state is
configured):
switch(config)# no fabric-binding activate vsan 1 force
Related Commands
vsan vsan-id Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
force (Optional) Forces fabric binding activation.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fabric-binding
database
Configures a fabric-binding database.
fabric-binding enable Enables fabric-binding.