Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-39
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fabric-binding database copy
fabric-binding database copy
To copy from the active fabric binding database to the configuration fabric binding database, use the
fabric-binding database copy command.
fabric-binding database copy vsan vsan-id
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and
Fibre Channel VSANs.
If the configured database is empty, this command is not accepted.
Examples The following example copies from the active database to the configuration database in VSAN 1:
switch# fabric-binding database copy vsan 1
Related Commands
vsan vsan-id Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fabric-binding diff Provides the differences between the fabric-binding databases.