Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-40
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fabric-binding database diff
fabric-binding database diff
To view the differences between the active database and the configuration database in a VSAN, use the
fabric-binding database diff command.
fabric-binding database diff {active | config} vsan vsan-id
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and
Fibre Channel VSANs.
Examples The following example displays the differences between the active database and the configuration
database in VSAN 1:
switch# fabric-binding database diff active vsan 1
The following example displays information about the differences between the configuration database
and the active database:
switch# fabric-binding database diff config vsan 1
Related Commands
active Provides information about the differences in the active database relating to
the configuration database.
config Provides information about information on the differences in the
configuration database relating to the active database.
vsan vsan-id Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fabric-binding copy Copies from the active to the configuration fabric binding database.