Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-44
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcalias clone
fcalias clone
To clone a Fibre Channel alias, use the fcalias clone command.
fcalias clone origFcalias-Name cloneFcalias-Name vsan vsan-id
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Usage Guidelines To disable a Fibre Channel alias, use the no form of the fcalias name command.
Examples The following example shows how to clone a fcalias named origAlias to cloneAlias on VSAN 45:
switch(config)# fcalias clone origAlias cloneAlias vsan 45
Related Commands
origFcalias-Name
cloneFcalias-Name
Clones a Fibre Channel alias from the current name to a new name.
Maximum length of names is 64 characters.
vsan The clone Fibre Channel alias is for a VSAN.
vsan-id The ID of the VSAN is from 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fcalias Displays the member name information in a Fibre Channel alias (fcalias).