Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-45
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcalias name
fcalias name
To configure a Fibre Channel alias, use the fcalias name command. To disable a Fibre Channel alias,
use the no form of the command.
fcalias name alias-name vsan vsan-id
no fcalias name alias-name vsan vsan-id
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Usage Guidelines To include multiple members in any alias, use the FCID, fWWN, or pWWN values.
Examples The following example shows how to configure an fcalias called AliasSample on VSAN 3:
switch(config)# fcalias name AliasSample vsan 3
switch(config-fcalias)#
Related Commands
alias-name The name of the fcalias. Maximum length is 64 characters.
vsan The fcalias is for a VSAN.
vsan-id The ID of the VSAN is from 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
member (fcalias
configuration mode)
Configures alias members for a specified zone.