Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-57
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcinterop fcid-allocation
fcinterop fcid-allocation
To allocate FCIDs on the switch, use the fcinterop fcid-allocation command. To disable FCIDs on the
switch, use the no form of the command.
fcinterop fcid-allocation {auto | flat | none}
no fcinterop fcid-allocation {auto | flat | none}
Syntax Description
Command Default The default is automatic allocation of FCIDs.
Command Modes Configuration mode
Command History
Usage Guidelines This command defines how the switch assigns FCIDs.
Examples
The following example sets the FCID allocation to flat:
switch(config)# fcinterop fcid-allocation flat
Related Commands
auto Assigns single FCID to compatible HBAs.
flat Assign single FCID.
none Assigns FCID range.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show flogi database Displays the fabric login (FLOGI) table.