Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
1-38
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
feature fcoe
feature fcoe
To enable virtual and native Fibre Channel interfaces after installing the FC_FEATURES_PKG license,
use the feature fcoe command. To disable Fibre Channel interfaces and return the FC_FEATURES_PKG
license to the license manager software, use the no form of the command.
feature fcoe
no feature fcoe
Syntax Description This command has no arguments or keywords.
Command Default FCoE is disabled.
Command Modes Configuration mode
Command History
Usage Guidelines You must save the configuration, and then reboot the switch to enable or disable the FCoE feature.
Examples This example shows how to enable FCoE on the switch:
switch(config)# feature fcoe
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fcoe mode Creates a VLAN interface.