Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-82
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fspf config
Command History
Usage Guidelines The fspf config command enters FSPF configuration mode for the specified VSAN. In FSPF
configuration mode, the commands configure FSPF for this VSAN .
Examples The following example configures static SPF computation in VSAN 1 and deletes the FSPF
configuration in VSAN 3:
switch(config)# fspf config vsan 1
switch(fspf-config)# spf static
switch(fspf-config)# exit
switch(config)# no fspf config vsan 3
switch(config)#
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fspf interface Displays information for each selected interface.
fspf enable Enables FSPF routing protocol in the specified VSAN
fspf cost Configures the cost for the selected interface in the specified VSAN
fspf hello-interval Specifies the hello message interval to verify the health of a link in the
VSAN
fspf passive Disables the FSPF protocol for the specified interface in the specified VSAN
fspf retransmit Specifies the retransmit time interval for unacknowledged link state updates
in specified VSAN