Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-91
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
interface fc
Command History
Usage Guidelines You can specify a range of interfaces by entering a command with the following example format:
interface fc 1/1 - 5 , fc 2/5 - 7
Refer to the Cisco Nexus 5000 Series CLI Configuration Guide for information on port number
allocation.
Use the no shutdown command to enable the interface.
The channel-group auto command enables autocreation of port channels. If autocreation of port
channels is enabled for an interface, you must first disable this configuration before downgrading to
earlier software versions or before configuring the interface in a manually configured channel group.
Examples The following example configures ports 1 to 4 in Fibre Channel interface 3:
switch(config)# interface fc 3/1 - 4
The following example enables the Fibre Channel interface in port 1 of slot 3:
switch(config)# interface fc 3/1
switch(config-if)# no shutdown
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show interface Displays an interface configuration for a specified interface.
shutdown Disables and enables an interface.