Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-116
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
port-track enable
port-track enable
To enable port tracking for indirect errors, use the port-track enable command. To disable this feature,
use the no form of the command.
port-track enable
no port-track enable
Syntax Description This command has no other arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History
Usage Guidelines The software brings the linked port down when the tracked port goes down. When the tracked port
recovers from the failure and comes back up again, the tracked port is also brought up automatically
(unless otherwise configured).
Examples The following example shows how to enable port tracking:
switch(config)# port-track enable
The following example shows how to disable port tracking:
switch(config)# no port-track enable
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show interface fc Displays configuration and status information for a specified Fibre Channel
interface.
show interface
san-port-channel
Displays configuration and status information for a specified SAN port
channel interface.