Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
8-124
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
rscn commit
rscn commit
To apply a pending Registered State Change Notification (RSCN) configuration, use the rscn commit
command. To discard a pending RSCN configuration, use the no form of the command.
rscn commit vsan vsan-id
no rscn commit vsan vsan-id
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Usage Guidelines If you commit the changes made to the active database, the configuration is committed to all the switches
in the fabric. On a successful commit, the configuration change is applied throughout the fabric and the
lock is released.
Examples The following example commits an RSCN configuration on VSAN 1:
switch(config)# rscn commit vsan 1
Related Commands
vsan vsan-id Specifies a VSAN where the RSCN configuration should be committed. The
ID of the VSAN is from 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
rscn abort Cancels a pending RSCN configuration on a specified VSAN.
rscn distribute Enables the distribution of an RSCN configuration.
rscn event-tov Configures an RSCN event timeout.
clear rscn session Clears the RSCN session for a specified VSAN.
show rscn Displays RSCN configuration information.