Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
9-4
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show debug npv
show debug npv
To display the N Port Virtualization (NPV) debug commands configured on the switch, use the show
debug npv command.
show debug npv
Syntax Description This command has no other keywords or arguments.
Command Default None
Command Modes EXEC mode.
Command History
Usage Guidelines The show debug npv command is available only when the switch is in NPV mode.
Examples The following example shows all the NPV debug commands available on the switch:
switch# show debug npv
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
debug npv Enables debugging NPV configurations.