Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
9-9
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fc2
show fc2
To display FC2 information, use the show fc2 command.
show fc2 {bind | classf | exchange | exchresp | flogi | nport | plogi | plogi_pwwn | port [brief] |
socket | sockexch | socknotify | socknport | vsan}
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays FC2 active socket information:
switch# show fc2 socket
The following example displays FC2 socket binding information:
switch# show fc2 bind
The following example displays FC2 local N port information:
switch# show fc2 nport
bind Displays FC2 socket bindings.
classf Displays FC2 classf sessions.
exchange Displays FC2 active exchanges.
exchresp Displays FC2 active responder exchanges.
flogi Displays FC2 FLOGI table.
nport Displays FC2 local N ports.
plogi Displays FC2 PLOGI sessions.
plogi_pwwn Displays FC2 PLOGI pWWN entries.
port Displays FC2 physical port table.
brief Displays FC2 physical port table in brief format.
socket Displays FC2 active sockets.
sockexch Displays FC2 active exchanges for each socket.
socknotify Displays FC2 local N port PLOGI/LOGO notifications for each socket.
socknport Displays FC2 local nports per each socket.
vsan Displays FC2 VSAN table.
Release Modification
4.0(0)N1(1a) This command was introduced.