Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
9-34
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show npv flogi-table
show npv flogi-table
To display the information about N port virtualization (NPV) FLOGI session, use the show npv
flogi-table command.
show npv flogi-table
Syntax Description This command has no other keywords or arguments.
Command Default None
Command Modes EXEC mode.
Command History
Usage Guidelines The show npv flogi-table command is available only when the switch is in NPV mode.
Examples The following example displays the information on NPV FLOGI session:
switch# show npv flogi-table
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show npv status Displays the NPV current status.