Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
9-53
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show zone analysis
show zone analysis
To display detailed analysis and statistical information about the zoning database, use the show zone
analysis command.
show zone analysis {active vsan vsan-id | vsan vsan-id | zoneset name vsan vsan-id}
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays detailed statistics and analysis of the active zoning database:
switch# show zone analysis active vsan 1
The following example displays detailed statistics and analysis of the full zoning database:
switch# sh zone analysis vsan 1
Zoning database analysis vsan 1
Full zoning database
Last updated at: 14:36:56 UTC Oct 04 2005
Last updated by: Local [CLI / SNMP / GS / CIM / INTERNAL] or
Merge [interface] or
Remote [Domain, IP-Address]
[Switch name]
Num zonesets: 1
Num zones: 1
Num aliases: 0
Num attribute groups: 0
Formatted database size: < 1 Kb / 2000 kb ( < 1% usage)
Unassigned zones:
zone name z1 vsan 1
active Displays analysis information for the active zone set.
vsan vsan-id Displays analysis information for the specified VSAN ID. The range is 1 to
4093.
zoneset name Displays zone set analysis information for the specified zone set.
Release Modification
4.0(0)N1(1a) This command was introduced.