Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
9-54
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show zone analysis
Table 9-4 describes the fields displayed in the output of a show zone analysis command for the full
zoning database.
Table 9-4 show zone analysis Field Descriptions for the Full Zoning Database
Field Description
Last updated at Displays a time stamp showing when the full zoning database was last
updated.
Last Updated by Displays the agent that most recently modified the full zoning database. The
agent can be one of the following three types:
• Local: indicates that the full database was last modified locally through
a configuration change from one of the following applications:
– CLI—The full zoning database was modified by the user from the
command line interface.
– SNMP—The full zoning database was modified by the user through
the Simple Network Management Protocol (SNMP).
– GS—The full zoning database was modified from the Generic
Services (GS) client.
– CIM—The full zoning database was modified by the applications
using the Common Information Model (CIM).
– INTERNAL—The full zoning database was modified as a result of
an internal activation either from Inter-VSAN Routing (IVR) or
from the IP storage services manager.
• Merge—Indicates that the full database was last modified by the Merge
protocol. In this case, the interface on which the merge occurred is also
displayed.
• Remote—Indicates that the full database was last modified by the
Change protocol, initiated by a remote switch, when the full zone set
distribution was enabled. The domain, IP address, and switch name of
the switch initiating the change are also displayed.
Note The switch name is displayed on the next line, aligned with the
domain, only if the switch name is set. The default switch name
switch and the ip-address are not displayed.
Num zonesets Displays the total number of zone sets in the database.
Num zones Displays the total number of zones in the database, including unassigned
zones.
Num aliases Displays the total number of aliases in the database, including unassigned
FC aliases.
Num attribute groups Displays the total number of attribute groups in the database. This field
applies only when enhanced zoning is used.