Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
1-53
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
line console
line console
To specify the console port and enter console port configuration mode, use the line console command.
line console
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Interface configuration mode
Command History
Usage Guidelines You can configure the console line only from a console port session.
Examples This example shows how to enter console port configuration mode:
switch# configure terminal
switch(config)# line console
switch(config-console)#
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
databits Configures the number of data bits in a character for a port.
exec-timeout Configures the inactive terminal timeout for a port.
modem Configures the modem settings for a port.
parity Configures the parity settings for a port.
show line Displays information about the console port configuration.
speed Configures the transmit and receive speed for a port.
stopbits Configures the stop bits for a port.