Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
1-55
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
modem in
modem in
To enable the modem connection on the console port, use the modem in command. To disable the
modem connection, use the no form of this command.
modem in
no modem in
Syntax Description This command has no arguments or keywords.
Command Default Timeout is disabled.
Command Modes Terminal line configuration
Command History
Usage Guidelines You can configure the console port only from a session on the console port.
Examples This example shows how to enable a modem connection on the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# modem in
This example shows how to disable a modem connection on the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# no modem in
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
line console Enters console port configuration mode.
show line Displays information about the console port configuration.