HP Designjet 4520 Printer series - Assembly Instructions: English

149 150 151 152
Feed the paper for a few centimeters more
after the printer beeps, then turn the roller
backwards to tension the paper correctly.
Lift the blue lever on Drawer 2. This is located
on the right-hand side of the printer and under
Drawer 1.
Feed the paper from roll 2 onto the drawer 2
platen. Align the paper parallel with the blue
lines on the right side of the platen. The paper
edge does not need to be aligned exactly with
a specic blue line, but between the two outer
lines.
With the blue stop on the left, lower the spindle
into Drawer 2.
153 154 155 156
The front panel displays the above. Highlight
the paper type you have loaded and press the
Select key.
Using two hands, push in Drawer 2. Using the stops, carefully wind the excess paper
back on to the spindle.
Lower the blue lever for Drawer 2.
CM768-900011.indd 20 03/02/2009 17:12:44