User's Manual

Shift images on the page
You can adjust the placement of the image on the page toward any edge.
1. On the File menu, click Print.
2. Open the Finishing menu.
3. On the Image Shift tab, select the appropriate settings.
●
You can adjust the front and back sides independently by specifying measurements for Front
Side Shift and Back Side Shift.
●
You can adjust the front and back sides by the same amount, but in opposite directions. This
is useful for creating a wider margin along the binding edge. Select Front Side Shift, specify
the settings, and then select Mirror Front Side.
●
Select Reduce to Fit to shrink the image to accommodate increased margins.
Set the stapling options
If the HP Multifunction Finisher is installed, you can staple documents.
1. On the File menu, click Print.
2. Open the Finishing menu, and select Output Bin 5 for the Output Destination.
3. On the Finishing tab, next to Finishing Options or Staple, select the stapling option that you want
to use.
Set the color options
Use the Color/Quality Options menu to control how colors are interpreted and printed from software
programs.
1. On the File menu, click Print.
2. Open the Color/Quality Options menu.
3. Select the color options that you want to use.
Use the Services menu
If the device is connected to a network, use the Services menu to obtain device and supply-status
information.
1. On the File menu, click Print.
2. Open the Services menu.
3. Select a maintenance task from the drop-down list, and then click Launch. The embedded Web
server opens to the page that provides the information for the task that you selected.
66 Chapter 2 Use the device ENWW