Instruction Manual

Figure13CablinganHPCWDMAdd/DropMUXModule
Connecting to the network
There are two possible network config urations, using either t wo or three HP CWDM MUX modules:
Two HP CWDM MUX configuration
• For a two HP CWDM MUX module configuration, connect the net work port of the first HP CWDM
MUX module to the network port of the second HP CW DM MUX module.
For non-redundant cabling, see Figure 4 and Figure 5.
For redundant cabling, see Figure 7 and Figure 8.
Three HP CWDM MUX configuration
For a three HP CWDM MUX module configuration:
1. Connect the network por t of the HP CWDM 8-port Multiplexer/Demultiplexer to the net work port of
the first
HP C WDM Slot A/Slot B 4-port Add/Drop Multiplexer.
2. Connect the pass por t of the HP CWDM Slot A/Slot B 4-port Add/Drop Multiplexer to the network
portofthesecondHPCWDMSlotB/SlotA4-portAdd/DropMultiplexer.
For non-
redundant cabling, see Figure 6.
For redundant cabling, see Figure 9.
CWDM MUX user guide
23