User Guide

EN Installing the consumables 99
To install the imaging drum
1 Open the front door of the printer
(A). Swing the upper (blue) lever to
the right (B). Press the white button
on the lower (green) lever and swing
the lever to the right (C).
CAUTION
There is a cover protecting the drum
cylinder. Do not remove this cover or the
drum might be damaged; it will come off
during the next step.
2 Push the drum into the printer. The
protective cover slides off as the
drum enters the printer.
3 Swing the lower (green) lever back
to the left, making sure it clicks into
place.
Note
If the lever does not return to its original
position, make sure that the imaging
drum is all the way in the printer.
3
1
2
A
B
C