User Guide

100 Chapter 3 - Operational overview EN
To install the black toner
cartridge
1 Remove the black toner cartridge
from its packaging and gently rock
the cartridge several times to
distribute the toner.
CAUTION
Do not lift or remove the shutter (A) on
the cartridge.
2 Align the arrow on the top of the
cartridge with the arrow at the top of
the slot in the printer and slide the
cartridge into the printer.
3 Place one hand on the cartridge and
use the other hand to pull the orange
ring and remove the seal. Discard
the seal.
Note
If toner gets on fabric, wipe the toner off
with a dry cloth and then wash the
clothing in cold water. Heat will set toner
into fabric.
4 Swing the upper (blue) lever back to
the left.
Note
If the lever does not return to its original
position, make sure that the black toner
cartridge and the imaging drum are all
the way in the printer and that the
orange seal was removed from the
toner cartridge.
1
4
3
2
A